铝板厂是如何解决花纹铝板染色问题，花纹铝板因其装饰性耐用性等优良特性，广受市民青睐，可是在生产过程中有一些花纹铝板的染色问题，不能达到生产商的期望的效果，为了解决这一问题，铝板厂为大家分享四种解决花纹铝板染色问题的办法。

How does the aluminum plate factory solve the dyeing problem of patterned aluminum plates? Patterned aluminum plates are widely favored by citizens due to their excellent characteristics such as decoration, durability, etc. However, there are some dyeing problems in the production process of patterned aluminum plates that cannot meet the expected results of the manufacturer. To solve this problem, the aluminum plate factory shares four methods to solve the dyeing problem of patterned aluminum plates.

选择好的铝板制件原料:通常生产过程中的高纯铝铝镁铝锰合金经过阳极氧化以后，其染色的功能是好的，可以染成各种各样的颜色。对于含硅或铜比较重的板材，在染色的过程中只能够染成深色与黑色，比较单调的颜色。

Choose the right raw materials for aluminum plate parts: usually, high-purity aluminum aluminum magnesium aluminum manganese alloy in the production process is anodized, and its dyeing function is good, which can be dyed into various colors. For boards with heavy silicon or copper content, only dark and black colors can be dyed during the dyeing process, which are relatively monotonous.

控制好氧化膜的厚度:氧化膜就是指铝板膜层的厚度孔隙率透明度等。铝板中膜层的厚度保持在10um以上就可以了，孔隙率以及透明度，可以得到好的染色质量。

Control the thickness of the oxide film: The oxide film refers to the thickness, porosity, transparency, etc. of the aluminum plate film layer. The thickness of the film layer in the aluminum plate should be maintained above 10um, and the porosity and transparency can achieve good dyeing quality.

把握好染色液的浓度:铝板的浓度与染色之间有着联系，如果铝板染淡色，其中浓度可以低一点，染深色其浓度可以高一点。通常所生产的铝板材料所染比较淡的颜色其色彩为0。1-0。39g/L，染淡色彩为1g/L，染深色彩为3-5g/L，染稠密的色彩为10-15g/L，如果染色的浓度比较高就会造成颜色不均或出现浮色现象，在清洁与关闭的过程中容易出现“流色”。为了加强染色的吸附性，会使用低浓度颜色进行延伸染色，这样可以使染料分子比较均匀的渗透到氧化膜孔隙的深处，这样可以使所染的颜色更加和谐与牢固。

Grasp the concentration of the dyeing solution: There is a connection between the concentration of aluminum plate and dyeing. If the aluminum plate is dyed light, the concentration can be lower, and if dyed dark, the concentration can be higher. The color of the aluminum plate material that is usually dyed lighter is 0. 1-0. 39g/L, light color is 1g/L, deep color is 3-5g/L, and dense color is 10-15g/L. If the dyeing concentration is relatively high, it will cause uneven color or floating color phenomenon, which is easy to occur during the cleaning and closing process. In order to enhance the adsorption of dyeing, low concentration colors are used for extended dyeing, which can allow dye molecules to penetrate more evenly into the deep pores of the oxide film, making the dyed color more harmonious and firm.

控制好染色液温度:铝板的染色分为冷染与热染。使用冷染，在生产的过程中使用的时间比较长，所染色彩均匀性比较好掌握。热染使用的时间比较短，但是对颜色的操控比较难。热染的温度在通常在40-60℃。如果温度过高，会减小染色的吸附性，并且容易导致铝板的表面发花。

Control the temperature of the dyeing solution: The dyeing of aluminum plates is divided into cold dyeing and hot dyeing. Cold dyeing is used for a relatively long time during the production process, and the uniformity of the dyed color is easy to control. The use time of hot dyeing is relatively short, but it is difficult to control the color. The temperature of hot dyeing is usually between 40-60 ℃. If the temperature is too high, it will reduce the adsorption of dyeing and easily cause the surface of the aluminum plate to flower.